Recover V8S

Recover a Dead/Bricked/Non-Working OPENBOX

So you might be facing a bunch of issues, your OPENBOX keeps restarting, it says “LOAD” and doesn’t switch on properly, it basically is not working. What should you do? Fix it. How? Keep reading… (P.S. This is completely normal, every time you put a USB into the box, and upgrade the firmware or channel list, you will be very lucky to come out with the box still working).

 

You will need a Null Modem Cable RS232 imaged below. Now not all of us in this 21st century have a PC with that port, so just go to eBay and get a “RS232 to USB cable” (this is a RS232 on one end and a USB to connect to your PC/Laptop on the other end). Make sure that comes with a CD so you can install drivers, it will cost you no more than few £s including delivery for the whole bundle. If you are a reseller then we recommend you buy a better one (gold plated) as they last longer. I am using one for seven years which bought from Maplin for £17 but still in excellent condition.

RS232 Cable

RS232 IMAGE 

Here’s an illustration of what you need to do with this cable:

connections

1.     Please Click Here to download V8 RS232 Tools in Zip Format

tools

2. Please Extract the File to the location of your choice.

3. Now connect your box with your pc via RS232 cable but make sure you don’t connect power to the box now.

4. Open the downloaded folder and run “EromUpgrade” and for V8 run “”EromUpgrade.exe”

tools-1

5.

tools-2

6.

7.

tools-4

8.

tools-5

9.

tools-6

10.

tools-7

11.  Press “Next”

tools-8

12.

tools-9